A whole-house repipe in the Columbus area typically costs $4,000 to $15,000 or more. Larger multi-bath, copper or complex homes can run higher. PEX usually falls in a range of about $4,000 to $12,000; copper runs roughly $6,000 to $18,000 or more, depending heavily on house size. These are typical ranges for Columbus-area projects, not quotes, and Slate Repiping Columbus gives a written scope and price only after a walk-through of the house.
Typical ranges for a Columbus repipe
| Work | Typical range | What it usually covers |
|---|---|---|
| Whole-house repipe, any material | $4,000 to $15,000+ | All hot and cold supply lines from the main shutoff to the fixtures; larger, multi-bath, copper or complex homes run higher |
| Whole-house repipe in PEX | $4,000 to $12,000 | PEX distribution in trunk-and-branch or manifold layout, fixture reconnections, testing |
| Whole-house repipe in copper | roughly $6,000 to $18,000+ | Rigid copper runs; depends heavily on house size |
| Partial repipe | No public range | Priced by the length of pipe, the fixtures served and the openings; see the partial repiping page |
The ranges are wide because houses are. A one-story ranch with an open basement and one bathroom sits near the bottom. A two-story brick house with plaster walls, two and a half baths and a copper choice sits near the top or above it. Galvanized and polybutylene replacements are priced the same way as any whole-house repipe; the pipe coming out matters less than the pipe going in and the route it takes.
What’s inside a Columbus repipe price
A repipe price is labor, material, the permit and restoration. Some of those parts have public figures and some do not.
| Part of the price | What sets it | Local figure |
|---|---|---|
| Plumbing labor | Fixture count, stories, how pipe can be routed, access in basement, crawlspace and walls | Median plumber wage $30.41 an hour in the Columbus metro, $30.67 nationally (Bureau of Labor Statistics) |
| Pipe and fittings | PEX or copper, layout, number of fittings | Copper mill prices up about 30% in a year; plastic pipe up about 4 to 5% (BLS producer price index) |
| Permit and inspections | Which office covers the address | $275 for a 1, 2 or 3 family home in Columbus (Building and Zoning Services); county plan review and per-fixture fees in many suburbs |
| Valves and fixtures | New main shutoff, fixture stops, water heater connections | No public figure; listed in the scope |
| Wall and ceiling patching | Number and size of openings, plaster or drywall, paint | No public figure; a scope item to check |
| Old pipe | Removed where reachable, capped where not | No public figure; listed in the scope |
A wage is not a billing rate. The hourly price a plumbing company charges also carries the State of Ohio contractor license, City registration, insurance, vehicles, tools and office costs. The wage figures matter for a different reason: they show Columbus labor costs sit at the national level, so a Columbus repipe should not carry a local labor premium the way one in a high-wage metro might.
Permit fees by office
Who issues the permit depends on the address, and so does the fee.
| Where the house is | Who issues and inspects | Fee |
|---|---|---|
| City of Columbus, 1, 2 or 3 family | Building and Zoning Services | $275, two inspections included |
| City of Columbus, 4+ units or commercial | Building and Zoning Services | $550 with one inspection, $700 with two; plan review for a full system replacement |
| Upper Arlington, Bexley, Grandview Heights, Whitehall, Westerville, Dublin, Hilliard, Gahanna, Reynoldsburg and other contract cities | City permit, Franklin County Public Health plan review and inspection | Plan review $135 plus $80 an hour (half-hour minimum); permit $135 plus $20 per fixture |
| Worthington | Worthington Division of Building Regulation issues the permit; who inspects is confirmed per address | $155 for the first fixture, $20 for each additional, plus a 1% state fee |
Inside Columbus, an extra inspection trip costs $225, and work without a permit carries penalty fees of $200, $750 or $1,750 depending on the level. Since February 2026, plumbing permit applications in the cities served by Franklin County Public Health have to include the county’s plan review approval with a matching fixture count. The Columbus repiping permit guide covers who can pull the permit.
Want a number for your house?
A walk-through turns these ranges into a written scope: material, openings, permit and price.
Why two quotes for the same house differ
Most of the gap between two repipe quotes comes from four things:
- Patching. One quote includes closing every opening in plaster or drywall; the other leaves it to the owner. Ask for the list of openings and who closes each one.
- Layout and material. A manifold PEX system uses more tubing and a valve panel; a trunk-and-branch layout uses fewer feet of pipe. Copper costs more to buy and more to install in tight spaces; the PEX vs copper guide compares the two.
- What stays. A low quote may replace the main and the easy branches and leave the hardest runs in old pipe. The repipe vs repair guide explains how to read where a scope stops.
- The extras. A new main shutoff, fixture stops, a pressure-reducing valve or new water heater connections are sometimes in the price and sometimes added later.
Two budget examples (illustrative)
These examples are illustrative, built from the typical ranges above. They are not quotes and not real jobs.
- A one-story Clintonville-style house with an open basement and one bath, repiped in PEX. The main and most branches run on exposed joists, with openings mainly behind the kitchen sink and the tub. A house like this would usually sit in the lower part of the $4,000 to $12,000 PEX range.
- A two-story brick double with plaster, a bath on each floor of each half, repiped in copper. Two sets of fixtures, a climb to each upstairs bath and plaster patching put a job like this near the top of the copper range or above it.
What doesn’t belong in a repipe price
A supply repipe replaces the hot and cold water pipe inside the house. The buried service line from the street, drains and vents, and the sewer line are separate work with separate prices. Inside Columbus, the City’s lead service line program replaces lead and galvanized service lines, and its zero-interest LEAP loan covers service line work by an approved contractor. Neither pays for interior piping. The Columbus lead service line program guide explains where that program stops and a repipe starts.
To turn these ranges into a number for your house, try the repiping cost estimator or call Slate Repiping Columbus to set up a walk-through.
